Hỗ trợ khách hàng  Hỗ trợ K/H: 0906.316.466
Hotline:
0906.316.466
Chi tiết sản phẩm

Single Fiber Arc Fusion Splicer_FSM-60S

  • Giá: Liên hệ
  • Lượt xem: 1053
Mô tả
-Core to core alignment by PAS (Profile Alignment System) technology.
-Environmental resistant features, Environmental resistance features.
-World's most compact and lightest of its class.
-Arc calibration-free system
-4.1" TFT color LCD monitor
-Dual directional operation system.
-Long life battery.
-Fiber holder option.
-Software upgrade via internet.
-Detachable work-table (attached to carrying case).
Mọi thông tin chi tiết liên hệ số
0906.316.466
UY TÍN - CHẤT LƯỢNG - HỢP TÁC LÂU DÀI
Specifications:
ITEM SPECIFICATIONS
Applicable type of fibers SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655)
and other single mode fibers including ITU-T G.657 fibers.
Fiber count Single
Applicable fiber dimensions Cladding diameter : 80 to 150µm
Coating diameter : 100 to 1000µm
Fiber setting and cleaved length Sheathe clamp A (Standard) : For coating dia. up to 250mm (8 to 16mm cleave), coating dia. of over 250mm(16mm cleave)
Sheathe clamp B(option) : For coating dia. up to 1000mm (8 to 16mm cleave)
Sheathe clamp C(option) : For 900mm dia. loose tube fiber (8 to 16mm cleave)
Fiber holder (option) : FH-60-250, FH-60-900 (10mm cleave)
Splicing modes Total 100 modes
Typical splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS. (Measured by cut-back method relevant to ITU-T standard).
Return loss >>60dB
Splicing time Typical 9sec.with SM FAST, 10sec.with SM AUTO and 13sec.with AUTO modes with standard SM(ITU-T G.652).
Splice loss estimate Available
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB ( 0.1dB step ) can be made for an in-line fixed attenuator.
Tube heater / heating time Built-in tube heater with 30 heating modes. / Typical 30sec with Fujikura FP-03.
Applicable protection sleeve 60mm, 40mm and Fujikura FPS01 series.
Storage of splice result The last 2000 results to be stored in the internal memory.
Tension test 1.96 to 2.25N
Operating condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively.
Storage condition 0 to 95%RH and -40 to 80 degC respectively. Battery : -20 to 30 degC for long term.
Dimensions 136W Ã— 161D Ã— 143H [mm] excluding rubber foot.
Weight 2.3kg with AC adaptor ADC-13, 2.7kg with battery BTR-08.
Viewing method and display Two CMOS cameras and 4.1" color LCD monitor.
Fiber view and magnification X / Y (300X magnification), or both X and Y simultaneously (187X magnification).
Power supply Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08.
No.of splice cycles with battery Typical 160 cycles (splice / tube heat) with BTR-08.
Electrode life 2500 arc-discharges
Terminals USB 1.1 (USB-MiniB type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02/03 or SH-8S/R/C power supply.

Sản phẩm cùng loại

Thiết bị nguồn

Thiết bị nguồn

• Thiết kế nhỏ gọn, lắp trên khung giá chuẩn 19" 
• Tùy chọn sử dụng chiều cao 3U
• Thiết kế kiểu module
• Phần mềm được cấu hình sẵn
• Khả năng mở rộng công suất nhanh (hot-swap: Thay thế nóng)
 Hand Held Active Aligment Splicer - S153A

Hand Held Active Aligment Splicer - S153A

Key features:
- Active V-groove, More Reliable than conventional Fixed V-groove machines
- Rugged and compact hand held design for demanding environmental conditions
- Fast splice (9 sec) at super low loss and Fast Heating (25 sec)*1
- 200 cycles (Splicing & Heating) with Fitel series battery configuration*2
- Available for All METRO/LAN/FTTx fibers including ultra bend-insensitivefibers (e.g. EZ-BendTM)
- Splicer is compatible with the Seikoh Giken and Diamond Spliceon- connector (SOC)
- Easy maintenance - Toolless electrode replacement/mirror free alignment system
- Easy Software upgrade via the Internet
-Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
- PC interface software to allow user manage splicing programs and results
- Auto-start shrink sleeve oven feature
- Improved GUI to further enhance ease-of-use
- Large memory for storing data (2,000 splice data) and image (100 images)
DIGITAL FUSION SPLICER

DIGITAL FUSION SPLICER

Features
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display 
USB & VGA interface
Software upgrade via USB interface

Tin tức

Bạn đang xem bài viết về " Thành phố Hồ Chí Minh có dịch vụ quản...

Video Clip